银灿科技量产工具(Innostor MPTool)v2.11.02.11免费版

银灿科技量产工具(Innostor MPTool)是一款功能强大的U盘量产工具，无论是企业还是个人，都可以利用银灿科技量产工具进行U盘量产工作，软件使用起来简单好用，有需要的可以下载使用。

基本简介

U盘量产即U盘批量生产的意思。在U盘出厂时候最后一道工序是量产。而现实中，水货U盘，或者需要制作带CD-ROM盘的U盘，方便u盘装系统，也用到量产。
而量产需要识别U盘的主控方案。也就是芯片方案。一般使用ChipGenius软件查看，并且对应的下载相关量产工具。当然提醒大家的是尽量买原厂正品U 盘。芯片在量产之前首先要确定的就是自己U盘的主控芯片，确定之后才能找到合适的量产工具。主控芯片的分类有：群联、慧荣、联阳、擎泰、鑫创、安国、芯 邦、联想、迈科微、朗科、闪迪。这些是可以通过ChipGenius检测出的。

软件特色

1、USB-FDD （软盘模式）： 启动后U盘的盘符是A，且容量只有1.44MB，至于FDD早就已经退出历史舞台了；
2、USB-ZIP（大软盘模式）： 启动后U盘的盘符是A；USB-ZIP大容量软盘仿真模式，此模式在一些比较老的电脑上是唯一可选的模式，但对大部分新电脑来说兼容性不好，特别是大容量 U盘。FlashBoot制作的USB-ZIP启动U盘即采用此模式。USB-ZIP+增强的USB-ZIP模式，在DOS启动后显示A:盘，有些显示 C:盘(根据电脑的BIOS支持情况不同)，支持USB-ZIP/USB-HDD双模式启动，从而达到很高的兼容性。其缺点在于有些支持USB-HDD的 电脑会将此模式的U盘认为是USB-ZIP来启动，从而导致4GB以上大容量U盘的兼容性有所降低。
3、USB-HDD （硬盘模式）： 启动后U盘的盘符是C。（注意：这个模式在安装系统时容易混淆U盘和硬盘的C分区）；USB-HDD硬盘仿真模式，此模式兼容性很高，但对于一些只支持 USB-ZIP模式的电脑则无法启动。HPUSBFW工具制作的U盘即采用此启动模式。USB-HDD+增强的USB-HDD模式，DOS启动后显示C: 盘，兼容性高于USB-HDD模式。同样对仅支持USB-ZIP的电脑无法启动。
4、USB-CDROM（光盘模式）： 启动后U盘的盘符是光驱盘符。USB-CDROM光盘仿真模式，DOS启动后可以不占盘符，兼容性比较高，新老主板一般都可以。优点可以像光盘一样使用 (如，进行Windows系统安装)。缺点，我们将失去对这部分U盘空间的写权利，剩余空间会被识别成为一个独立的U盘，可以为Removable盘，当 然也可以做成Fixed盘，进一步分区；

注意事项

错误代码说明：
11:"Open Execute File error!";
12:"Can't support NAND Function!";
13:"Send Execute CMD fail!";
14:"Check busy after Send Execute CMD!";
15:"Can't support NFTL Function!";
16:"Device Setup already, please erase first!";
17:"Can't support LED Function!";
18:"Check busy after Execute step!";
19:"Send GetMap CMD fail!";
20:"Return Channel not match!";
21:"Return Bank not match!";
22:"Return SizeofIDCode not match!";
23:"Return Flash ID not match!";
24:"Check busy after TestGetMap Step!";
25:"TestConfig Send IODriving_CMD fail!";
26:"TestConfig Send SET_ECC_CMD fail!";
27:"TestConfig Send SET_ACTiming_CMD fail!";
28:"TestConfig Send ConfigDevice_CMD fail!";
29:"TestConfig Send ConfigDevice_CMD fail!";
30:"Check busy after Send ConfigDevice_CMD!";
31:"Check busy after Test Config Step!";
32:"TestScanINIDFT Send CMD fail!";
33:"Check busy after TestScanINIDFT Step!";
34:"TestReadPhysical Send CMD fail!";
35:"TestCopy Send Init_NFTL CMD fail!";
36:"Check busy after Initial NFTL!";
37:"TestCopy Write fail!";
38:"TestCopy Read fail!";
39:"TestCopy RW Compare fail!";
40:"Check busy after TestReadPhysical Step!";
41:"TestErase Send CMD fail!";
42:"Check busy after TestErase!";
43:"Open USB FW File error!";
44:"Open SATA FW File error!";
45:"Send Write FW/Info CMD fail!";
46:"Check busy after Send Write FW/Info CMD!";
47:"Send Read FW/Info CMD fail!";
48:"Check busy after RW Info and FW!";
49:"Verify Info fail!";
50:"Write Descriptor fail!";
51:"Can't support Partition Function!";
52:"The Supported System IDs is incomplete!";
53:"open Image file fail!";
54:"Set Partition Fail!";
55:"Send Write Partition CMD fail!";
56:"Write CD-ROM partition fail!";
57:"Send ReadCapacity CMD fail!";
58:"Send Init_NFTL CMD fail!";
59:"Send Write Partition CMD fail!";
60:"Check busy after Partition!";
61:"Check busy after Copy Test!";
62:"This Format type not support!";
63:"This Windows version not support!";
64:"Can't get Diskletter!";
65:"Write Label name fail!";
66:"TestFormat fail!";
67:"Check busy after Format!";
68:"TestExecute ReInitial-Erase fail!";
69:"Inquiry Fail!";
70:"Can't Initial device , now run FW!";
71:"Check busy after Re-Initial erase Fail!";
72:"TestExecute Stop NFTL fail!";
73:"Send LEDC CMD fail!";
74:"TestFormat verify BPB fail!";
75:"Lock Disk fail!";
76:"UnLock Disk fail!";
77:"Get lock handle fail!";
78:"Get Total Sectors fail!";
79:"Open PC FW File error!";
80:"TestReadPhysical bad block over default setting!";
81:"TestReadPhysical Info-Block is bad!";
82:"Execute File not found!";
83:"TestReadPhysical Total size not enough!";
84:"TestReadPhysical Get total block too much!";
85:"TestFormat Create MBR error!";
86:"TestFormat Verify MBR fail!";
87:"Read Capacity fail!";
88:"Enable Optitmize for Performance fail!";
89:"Relink drive fail!";
90:"Disk size small than Media Partition!";
91:"Disk size small than Force capacity!";
92:"Can't support TEPF Function!";
93:"Refresh device fail!";
94:"Send Terminate CMD fail!";
95:"Check Unit Ready Timeout!";
96:"Innostor unlock CMD fail!";
97:"Innostor lock CMD fail!";
98:"Get Serial number fail!";
99:"Can't find good block to write FW!";
100:"Can't find good block to write Info!";
101:"TestConfig CT value error!";
102:"Hidden size incorrect!";
103:"Preload File Fail!";
104:"Can not find default Stor-String!";
105:"Write Info-Table fail!";
106:"Get Parameter fail!";
107:"Get Flash vendor fail!";
108:"Get Driving setting fail!";
109:"Can not Get File system!";
110:"Check Innostor device fail!";
111:"Check Preload files fail!";
112:"Cluster size not match!";
113:"Serial number over setting!";
114:"Not support ISF!";
115:"Set Permissions fail!";
116:"Can not support this version OS!";
117:"Not support this controller!";
118:"Support ISF Only!";
119:"Bad Block too much!";
120:"Serial number length not match!";
121:"Set parameter fail!";
122: "Device size over range!";
300:"SORTING_INVALID_HANDLE!";
301:"SORTING_SUCCESS!";
302:"SORTING_EVENT_FUNCTION_FAIL!";
303:"SORTING_STATUS_FUNCTION_FAIL!";
304:"SORTING_SET_PARAMETER_FAIL!";
305:"SORTING_GET_PARAMETER_FAIL!";
306:"SORTING_SET_PATTERN_FAIL!";
307:"SORTING_SET_TABLE_FAIL!";
308:"SORTING_ERASE_FAIL!";
309:"SORTING_WRITE_FAIL!";
310:"SORTING_READ_COMPARE_FAIL!";
311:"SORTING_GET_RESULT_FAIL!";
312:"SORTING_NOT_TLC_FALSH!";
313:"SORTING_FLASH_POWER_ONOFF_FAIL!";
314:"SORTING_SET_FEATURE_FAIL!";
315:"SORTING_SET_BMT_FAIL!";
316:"SORTING_BAD_BLOCKS_TOO_MUCH!";
317:"SORTING_NOT_SUPPORT_MULTI_CHANNEL_MULTI_BANK!";
318:"SORTING_SORTING_DATA_LENGTH_MISMATCH!";
319:"SORTING_SORTING_SET_ALPHA_TABLE_FAIL!";
320:"SORTING_VERIFY_IDBT_FAIL!";
321:"SORTING_QUICK_PARAMETER_FAIL!";
322:"SORTING_SORTING_INVLIAD_SORTING_LEVEL!";